Setting up Printers

You can easily set up a printer on Rose-Hulman's campus by finding it's hostname. To find a list of all the hostnames you can go to the url here and scrolling down to the table of printers. You need to be connected to the eduroam Wi-Fi network to print.

You will need the cups package to interface with printers, or similar. On campus, all of the printers are HP printers. You should install the hplip driver as a package on your system.

To check this, in Ubuntu/Debian-based distributions with the apt package manager, type sudo apt-get install cups. This will install cups on your system.

In Arch Linux based distributions (Manjaro, EndeavourOS, Parabola, etc.), type sudo pacman -S cups.

Similarly, with hplip, do the same thing, except replace "cups" with "hplip" in both examples.

Viewing All Printers

You must be logged into the eduroam network.

These tutorials assume you have cups already installed on your system.

KDE (probably works on GNOME as well)

Updated as of 9/23/2021.

WARNING: System Settings will not work if you don't know the printer's hostname. This is because the "Browse" button when adding a printer via SAMBA is apparently grayed out.

We will use system-config-printer instead, and it's been overall more reliable for me.

Tutorial:

You need to have the system-config-printer package already installed on your Linux system.

Go to the terminal and run the command

system-config-printer

A GUI will pop up. Click the "Unlock" button.

This will prompt you for your password which you should type then press ENTER.

Click on "Add Printer".

Scroll down to "Other Network Printers" > "Windows Printer via SAMBA".

Finding a Printer

Do the following:

1. Make the text box after smb:// show print/
2. Click "Browse" next to it
3. A login dialog should pop up. It says "you must log in to access print".
4. Enter your Rose email in the username box, which should be [NETWORKUSERNAME]@rose-hulman.edu
5. Leave the Domain as WORKGROUP. Do not change it.
6. Enter your Rose network password.
7. Click OK.
8. Click on a printer in the "SMB Browser" window. This is very similar to the way you would do it in Windows.
9. Note down the "Comment" which contains the model of the printer. You will need it when searching for a driver.
10. For example, to print on the printer in the Union, click "hmu100-ricoh" and click OK. (For future reference, the hostname is socket://hmu100-ricoh.printer.rose-hulman.edu, or socket://[name on the left].printer.rose-hulman.edu, should you follow the below tutorial.)

Driver Selection

1. In the other window, leave the radio box as "Prompt user if authentication is required" and click Forward.
2. Select your driver.
   1. For HP printers, this should be easy -- find your make and model. You do need to install hplip though (see at the top for instructions)
   2. For Ricoh printers, ignore the model number. Select Printer from Database > scroll down under Makes and click "Ricoh" > click "Ricoh PDF Printer [en] (recommended)".
3. Click Forward.
4. You can name your printer and give it a description which will only be stored locally. I called the Union one "HMU100", for example, and left the description as-is.
5. Click Apply and enter your password.
6. Do not print a test page unless you need it. This wastes paper. (Click "Cancel" in the dialog to do so.) Instead, I recommend you test a real document. If the document is confidential, print a test page first so you know this is the right printer.

Set your printer in the print settings, make sure it's letter (not A4 paper), and print away!

Sources: https://www.howtogeek.com/191323/how-to-share-printers-between-windows-mac-and-linux-pcs-on-a-network/

Doesn't work?

Try the socket://[name on the left].printer.rose-hulman.edu URL.

Go to printer queue (e.g. on the tray in KDE -> printer icon, click on it) > click on the right printer > "Active Jobs" > right click a job > Authenticate. Enter your rose username without @rose-hulman.edu this time, and your password, then click OK. Wait a few seconds, click "Completed jobs", and it should print.

Via the command line

Coming soon

Adding a Printer Given the Printer Hostname

These tutorials assume you have cups already installed on your system.

You need to have a printer hostname already figured out. If not, look at the tutorial above.

Via the command line

You need to have the system-config-printer package already installed on your Linux system.

To add a printer, go to the terminal and run the command

sudo system-config-printer

This will prompt you for your password which you should type then press enter.

It will bring up a printer menu that shows all available printers. To add a printer, click the + Add button in the upper left hand corner.

The default option will be to add a printer by the URI which is basically a link to the printer. The URI will be something like this:

socket://PRINTER_HOSTNAME.printer.rose-hulman.edu

All printer hostnames can be found on Rose-Hulman's EIT knowledgebase. Pick the location you want to print from.

For example, for Olin-257, the hostname is "o257-ps" meaning the URI would be socket://o257-ps.printer.rose-hulman.edu .

So type that value into the uri field and press "Forward".

Next you have to pick the printer driver. All printers on Rose-Hulman's campus are HP so pick HP and press "Forward".

Next pick the model for the printer. This information can also be found in the link where hostnames are found. The 9040dn is under the driver name "LaserJet 9040dn".

When you find the appropriate driver, press "Forward". This will bring you to the Installable Options. The defaults are usually fine so press "Forward" again.

Next you can give the printer a Printer Name, Description, and Location. These values are just to make it easy to remember which printer is which. Choose values and press "apply"

Now in the menu you should see the printer was added. You can right click on the printer, choose "Properties" and then press "Print Test Page" to print a test page. This will verify if the printer is correctly configured.

Now you can print from any application as normal.

KDE

Click on the Application Launcher in the bottom-left panel. Type "system settings" and click on the "System Settings" item. You can also go to the "Computer" tab > System Settings.

In KDE Plasma 5.11 and newer, the settings are arranged on the left panel. In older KDE Plasma versions, the settings are arranged in a grid.

In either case, scroll down to Hardware section > Printers. Click on "Add Printer". A "Select a Printer to Add" dialog box should come up. Click on "Manual URI" and type in the printer hostname.

All printer hostnames can be found on Rose-Hulman's EIT knowledgebase. Pick the location you want to print from.

For example, for Olin-257, the hostname is "o257-ps" meaning the URI would be socket://o257-ps.printer.rose-hulman.edu . Type that into the "Connection" box.

Click "Next". In "Pick a Driver", click on the driver matching the printer model and name. See the EIT knowledgebase link above for details. If there are multiple drivers, you should choose the (recommended) version, and (en) version if it is listed. If you see "requires proprietary plugin" in one of the listings, you can install that driver, unless you prefer not to install it.

Click "Next". You can give a name and description to the printer if you want to, or disable sharing. Click "Finish" to finish setup. You can print a test page by clicking on the printer name > "Maintenance" > "Print Test Page" to see if the configuration works properly.

Troubleshooting

Can't print

Make sure cups is enabled in a terminal: sudo systemctl status cups. If it says it's disabled or stopped, try typing: sudo systemctl enable cups && sudo systemctl start cups

Paper looks weird

Make sure you have selected Letter paper and not A4 paper in your printer settings and make that the default. That will make the page margins appear less "airy" on real paper. Sometimes Linux defaults to A4 when setting up a printer for the first time.